Save space with a RB series temperature controller that gives outstanding control capability and comprehensive functions incorporated into a slim body case.

• Panel space saving : 60mm depth (RB100 : 63mm depth)
• Easy maintenance Plug-in
• Easy-to-read with large 11-segment LCD display
• Store up to 4 Set Values
• Numerous inputs and outputs (Option)
• Calculates optimum PID values to stabilize control faster than ever
• Sampling 0.25sec
• Easy Fine tuning with 6-level of control response adjustment
• Startup tuning
• Easy parameter setup via USB loader port (Loader communication)

We manufacture a variety of thermocouples and resistance temperature detectors (RTD).
These can be special ordered to customer specifications.

RKC's resin pressure measuring system is suitable for monitoring and control of resin pressure for extruders.
The CZ-GP100 resin pressure sensor enables the measurement point where instrumentation was impossible in conventional sensor (CZ-100P, CZ-200P).

Since the sensing part is installed separately from a strain gauge (main unit), pressure measurement with a minimum temperature effect can be achieved.

Since the sensing part is installed separately from a strain gauge (main unit), pressure measurement with a minimum temperature effect can be achieved.

We can offer melt pressure sensors with 2-wire type 4 to 20mA input as well as sensors with 4-wire type 0 to 10V and 0 to 5V with an built-in amplifier.

The CZ-GP100 contributes to upgrading of molding product by digital indicator with sensor power supply (AE530), combination of digital controllers for strain gauge input (HA430/930).

RKC's resin pressure measuring system is suitable for monitoring and control of resin pressure for extruders.
The combination of resin pressure sensor (CZ-200P), the resin pressure indicator (PG500), the output converter (PCT-300) and digital controllers for strain gauge input (HA430/930) contributes to the improvement of productivity and quality of products.
The CZ-200P has new features such as built-in thermocouple while retaining high reliability of CZ-100P. The features of CZ200P includes: a wide selection of screw type, UNF, PF and M14/16 type screws, Low pressure type (0 to 0.5MPa, 0 to 1MPa), built-in thermocouple.
A push-rod method is used in CZ-200P. There is no risk of contamination in case of accident, so CZ-200P suits food processing application.

The LE100 is a back-pressure level meter specifically designed for the measurement of liquid chemical levels with high accuracy and repeatability.

While in operation, it automatically compensates for changes to specific gravity while providing reports of the bath's current status.

• Level settings 6 or 8 points
• Measuring range 0 to 1000 mm
• Selectable Display Units (mm, %, l, cc, Pa, KPa)
• High repeatability 0.3% full scale
• Specific gravity compensation
• One - touch empty adjustment
• One - touch span adjustment
• Volume compensation
• Digital communication (Optional)
• Monitoring output (Optional)