REX-D100:	REX-D100 241.00
1:Control Action:	F: PID Autotune 00.00 W: PID Autotune 72.00
2:Control Output(Heat):	M: Relay Contact 00.00 V: Voltage Pulse 00.00 [ ]: Specify Signal Code 38.00 T: Triac 38.00
3:Control Output(Cool):	N: None(Control Action F) 00.00 M: Relay Contact 00.00 V: Voltage Pulse 00.00 [ ]: Specify Signal Code 36.00 T: Triac 36.00
4:Alarms:	N:None 00.00 D: Dual Alarms (Field Programmable) 38.00
5:Heater Break Alarms:	N: None 00.00 S: Single Phase(specify 30A or 100A CTL-not included) 29.00 D:3-Phase(specify two 30A or 100A CTLs-not included) 29.00
6:Contact output:	N:None 00.00 1: Supplied-SP1/SP2 selection, standard 29.00 1: Supplied- Run/Stop selection, specify Z-188 at the end of model code 29.00
7:Retransmission:	N:None 00.00 [ ]: specify signal code 68.00
8:Communication:	N:None 00.00 5: RS-485 68.00
9:NEMA 4X:	N:None 00.00 1:Supplied 15.00
Accessories:	N:None 00.00 CTL-6-P-N 32.00 CTL-6-P-H 21.00 CTL-12-S56-10L-N 46.00 CTL-12-S56-10L 36.00
Shunt Resistor:	N: None 00.00 PTF6S 12.00

   

Configured model number:	D100 F M N N N N N N N N N
Configured price :	$626.00*

Ordering INSTRUCTIONS-:
1. If Heat/Cool PID Control with AT is selected, contact Input, Analog Retransmission Output, 3 Phase HBA and Communication Function can not be selected. 2. When Dual Alarms and HBA are specified, HBA is assigned to Alarm Relay #2 3. Select 1 from the following: Contact Input, Analog Retransmission, 3 Phase HBA or Communication Function. 4. If continuous voltage/Current output is specified, HBA can not be selected. 5. For 3 Phase HBA, Both CTL'S must have the amperage. 6. A Shunt register is required when used for current Input (Soled Spectrally) 7. Triace Rated to 0.5A@40 oC. Does not confirm to any UL, CSA listing.
SIGNAL CODE FOR D100 SERIES
CODE	VOLTAGE
4	0 TO 5 VDC
5	0 TO 10 VDC
6	1TO 5 VDC
CODE	CURRENT
7	0 TO 20 mADC
8	4 TO 20 mADC